Whirlpool RIHO, Руководство пользователя

Страница: 27 / 68

I
/
O
-25-
Enjoy the RIHO life-style
GB
G
B
RIHO
I
/
O
RIHO
I
/
O
4.0 Operation
4.1 Electronic operation.
For starting the , fill the bath after 5 cm above the highest jet (hydro-system) or upto around 15 cm below
the rim (aero-system).
Do not touch, handle or use electrical devices when using the whirlpool. This is extremely dangerous to the
user.
4.1.1 Operation of the single system (Hydro or Aero.) (See Fig. 7 and 8)
In single systems, hydro or aero, an operating system with one or two buttons, respectively (1 or 2 indication LEDs
(LED=Light Emitting Diode/lamp) may be used.
Single-button operation for on/off function (aero or hydro)
Two-button operation for on/off function (aero or hydro) and for lighting
For convenience, the term “the system” will be used in this manual.
As a protection, the system will switch off automatically after 20 minutes, unless the system is switched off
manually in advance.
Whirlpool bath
Fig. 8: two-button control panel
On/Off pushbutton:
Switch-on only if there is sufficient water.
This pushbutton is used to switch the system on and off.
On pressing the first time, the motor and the indication LED above the button will switch on.
On pressing the second time, the motor and the indication LED above the button will switch off.
!
!
!
Pressing down on this button will automatically make the system work harder and softer.
!
After this button is released, the system automatically remains turning at the speed at which you
released the button.
!
Press again, the motor and gauge lights go out.
!
When starting again, speed is always high.
Fig. 7: single-button control panel
Light pushbutton:
Switch-on only if there is sufficient water.
The light will switch on after pressing the light pushbutton once. The light function will switch off after 20
minutes.
If the light function is on and the water level
(2 seconds), the light function will switch off.
If the light function is switched on and the whirlpool motor is started, the time for the light function will be
set at the running time of the motor + 5 minutes. In other words, after the running of the whirlpool motor is
completed, the light will remain on for another 5 minutes.
The light will switch off after pressing the light button briefly.
drops
Optional Colour therapy:
Only to be switched on when the water level is sufficient.
Pressing the light switch for some time switches the colour therapy function on. The colour therapy
switches off after 20 minutes. When the light switch is pressed during the colour therapy the colour
change will stop, during which the LED above the key will flash. When you press the button again the
colour change will start again. If you wish to end the function earlier, press the light switch again for some
time and the colour therapy will be switched off. If the colour therapy is on and the water level gets too low
(2 sec) the colour therapy will switch off. If the colour therapy function is on when the whirlpool motor is
started, the time of the light function will be set to motor r 5 minutes. This means that once the
whirlpool motor has switched off, the colour therapy will stay on for another 5 minutes. When the motor is
switched off in the mean time, the colour therapy function will switch off 5 minutes later.
Whirlpool Electronic - User manual
Votre revendeur : DUVIVIER sàrl - www.duvivier.lu