Whirlpool RIHO, Руководство пользователя

Страница: 20 / 68

0
6
cm
2
0
m
4
c
e
on
1
Z
o
Z ne
2
one
3
Z
o
Z
ne
2
Z
ne
3
o
-18-
G
B
THE MANUFACTURER REFUSES TO ACCEPT ANY LIABILITY IN THE FOLLOWING CASES:
the national guidelines and standards that apply to earthing, potential and electrical
installations in the bathroom are not adhered to.
the contained in the national laws and standards that apply to safety in bathrooms are not adhered to
the instructions described in this manual are not adhered to.
dismantled after inspection in the factory to facilitate transport and to enable them to be carried into the room
in which they are to be installed. It is advisable to check all the components of the bath before installation.
Any damage claimed after installation will not be covered under the guarantee.
!
!
!
difference equalising
description
Parts are
Fig. 1: Safety distances
1.0 Installation of Riho Whirlpools
The s are fully in conformity with the applicable .
The installation must be fitted by a recognised installer.
The assembly and installation of the whirlpool must be done in accordance with the instructions
in this
manual.
The installer will be responsible to check that the civil, electrical and water-related
work is done properly.
Whirlpool bath EN and national guidelines
described
pre-installation
1.1 Safety regulations for bathrooms.
Electrical sockets, lamps, switches and/or other electrical equipment should be installed outside the danger zones
indicated in the national guidelines and standards. Above all, the regulations prohibit the presence of any electrical
installation within 60 cm around the bath, and less than 225 cm above it (see Fig.1).
and other electrical devices
should be installed so as to be inaccessible to the person using the whirlpool.
The switch
Z1209003.4 GB
Votre revendeur : DUVIVIER sàrl - www.duvivier.lu