WHIRLPOOL CORPORATION ▪ CONFIDENTIAL ▪ EMEA CS&Quality Technical Training and Serviceability Team ▪ By Nicola Padula and Nicola Bargagnati
It is possible to associate the automatic function only on specific zones (only on paired oviforms).
To see the complete user flow without step by step descriptions go directly to
Before that user starts cooking the message “Select a zone” is shown on the right LCD TS (see picture below).
According to the chosen function the user can select one or a pair of cooking zones.
The user, tapping on the left LCD TS , has to select the pair of zones where he will cook using Assisted Cooking. By
clicking on one zone the paired zones will be automatically selected by the system. The zones will light up.
If the user place a pot on the zone, it will be automatically recognized by the system.
If the selected zones do not have an available oviform to be activated together, the hob will play an incompatibility
sound and the selected zone will blink. This alert shows an incompatibility with user’s selection. To see the complete
behavior about incompatibility during the zone selection in assisted cooking mode see
When the zones are selected on the left LCD TS the zones are lighted up.
If
the user interacts with the slider when he is in Assisted cooking mode, the UI play incompatibility sound and “A” blink on
left LCD.
If a user is setting another cooking zone, with the first touch he selects the zone (the selected zone lights up on the left
LCD TS ), than he can select the power using the slider.
Operation
Set assisted cooking functions
