WHIRLPOOL CORPORATION ▪ CONFIDENTIAL ▪ EMEA CS&Quality Technical Training and Serviceability Team ▪ By Nicola Padula and Nicola Bargagnati
Operation
French plaque settings
Induc
tion
I
200
It is possible to set the power level of each quarter and to customize them according to own preferences
MAIN ACTION FROM THE USER
The user taps on the Settings icon on the right LCD TS.
The zone on the top left corner lights up and the other three zones switch off
The lighted up zone instead of showing HIGH, MID or LOW shows the equivalent power level value (in numbers)
(see picture below)
The HIGH MID and LOW value have three different range of action. The LOW level goes from 1 to 6. MID goes from
7 to 12. HIGH goes from 13 to BOOSTER.
The slider lights up according to the selected zone (if the top left corner zone is showing 8, the slider will be
backlit till 8).
The user can interact with the slider in order to increase or decrease the power level of that zone.
Action is performed only inside the range of action of that level. If the user is setting the MID level, no action is
performed if he selects below 7 or over 12.
The user, pressing another quarter, on the left LCD TS, confirms the previous setting and can make a change on
the second selected zone interacting with the slider
So, the first zone changes from numeric value to equivalent level (HIGH, MED or LOW) and the second zone does
the opposite.
It is possible to Exit from the Settings by pressing the EXIT icon on the right LCD TS.
