Whirlpool HC338, Инструкция по использованию, уходу и установке

Страница: 11 / 40

7
(6) Delay Off / Alarm
H
OOD
O
PERATION
water inlet
water tank
Excess water hole
cleaner/detergent
Water
- When fans are on or off,press this button to enable the auto clean.
- The hood shall be cleaned by using hood cleaner/detergent. Please do
not use abrasive cleaner/detergent which will damage the machine.
- Cleaning Steps:
a. Mix the cleaner/detergent and water by pouring them
to the marked level of the provided water jug. (the cleaner
/detergent : water = 1:12).Pour the cleaner/detergent
mixture in the water inlet as shown in the picture.
b. If the cleaner/detergent mixture comes out from
the excess water hole down into the oil cup, it means
that inside water tank is full and no more shall be
poured into the water tank.
c. Press the Auto Clean ( ) button to start with one
beep sound. The fans will change to low speed for
3 seconds, and then the water pump will operate for 10 seconds.
Then fans change to high speed and start cleaning for 25 seconds.
The auto clean process will end with two beep sounds.
d. Dirty oil/water will be flowed into the oil cup.
- When auto clean is enabled, press On/Off ( ) button to cancel at anytime.
- If the water level is low, the hood will have beep sound and with display
indication. Refill with water and press Auto Clean ( ) button to continue
cleaning process.
- After operation of 15 hours, there will be clean reminder shown on display
every time when you turn off the machine. The reminder display disappear when
you enable the auto clean function or pressing On/Off ( ) button for 3 seconds.
(7) Auto Clean
- Press this button once to enable delay off.
- The default fan speed is 3. The 2
nd
time usage will follow the last
memorized fan speed.
- The default time is 5 minutes. The 2
nd
time usage will follow the last
memorized time.
- The delay off process will start with one beep sound and end by two
beep sound with light turn off as well.
- Time set for delay off or alarm will be range from 1 min to 10 hrs. Press
Fan (+) button to increase time and L/R ( - ) button to decrease time.
- Press this button twice to enable alarm function.
- The default time is 1 min. The 2
nd
time usage will follow the last
memorized time.
- The alarm function will start with one beep sound. When time is up,
the display will illuminates “0.00” with 15 times beep sound. Press any
button to stop the beep sound, the display of “0.00” will be disappeared,
and then resume the original operating status. Or simply press the
On/Off ( ) button to turn off the machine.
- Time set for delay off or alarm will be range from 1 min to 10 hrs. Press
Fan (+) button to increase time and L/R ( - ) button to decrease time.
- Alarm
- Delay off or Alarm cannot be enabled at the same time.
- When delay off or alarm function is enabled, auto clean cannot functioned.
- Delay off