Whirlpool HC338, Инструкция по использованию, уходу и установке

Страница: 12 / 40

8
H
OOD
O
PERATION
(1) Power On/Off
- Press once On/Off ( ) button, the appliance will be in stand-by mode.
- Press once again, the appliance will be turned off with all function stopped,
except the light bulb is an independent control.
(2) Light
- Press this button to turn on and off light.
- The light can be operated independently; it only will turn off automatically
after delay off process is completed.
(3) Change the left and right fan
- Press On/Off ( ) button to go into stand-by mode before pressing this
button to change the L/R fans.
- Press this button to change left and right fan, -3- > -3 > 3-, if fan speed
3 is operating.
- When the auto clean is enabled, this button cannot operate.
-
When the delay off is enabled, still can change the left and right fan.
(4) Fan: Change the fan speed
- Press On/Off ( ) button to go into stand-by mode before pressing this
button to change the fan speed.
- For 1
st
time use, the default fan speed is 3 with both fans running at the
same time.
- Fan speed will change from -3- > -2- > -1-> -3-, if turn on both fans.
Fan speed will change from -3 > -2 > -1 > -3 , if only turn on left fan.
Fan speed will change from 3- > 2- > 1- > 3-, if only turn on right fan.
- When the auto clean is enabled, this button cannot functioned.
- When the delay off is enabled, still can change the fan speed.
(7) (6) (5) (4) (3) (2) (1)
Display Meaning Display Meaning
-3- left and right fan both at 3 speed dL Delay Off
-2 left fan at 2 speed C Clean
--- hood is at stand-by mode CR 15 hours clean reminder
(5) Display: below is list of each digital display
3.45 3 hours and 45 minutes L low water level
Auto clean and Easy dismantle 2 in 1 cookerhood
Model:HC638 / HC646