Whirlpool G0, Руководство пользователя

Страница: 63 / 79

©
Service Competence Center
Ind
u
ctio
n
G
0
Service
Code Type Repair suggestions:
shown on
display
Failure description of failure Points to check subsequently until the appliance starts to work properly
again.
Failure description / repair
Troubleshooting
F-47 E39 - One IPC only is
not responding within a time
T_to_have_response_
from_IPC
when it is polled
Type 2 1) Check if the harness / wires ( WIDE cables) are well connected in the related
connectors.
2) If this does not fix the appliance then: Replace the related IPC
3) If replacing the IPC with a new one did not fix the appliance, then check fuse
on filter boards. If interrupted replace fuse component.
4) If replacing the fuse with a new one did not fix the appliance change the Filter
board .
F-47 E47 - WIDE
communication error.
Communication
between USIF and all the
IPCs is not working.
Type 3 1) Check if the harness / wires ( WIDE cables) are well connected in the related
connectors. If this does not fix the appliance then:
2) Replace the USIF
F-48 IPC WIDE
communication error / live
tag
Type 2 1) Check the wire between USIF and IPC
2) Replace the power unit board
F-49 IPC WIDE
communication error / CRC
error
Type 2 1) Check the wire between USIF and IPC
2) Replace the power unit board
F-56 E56 - Wrong or invalid
USIF configuration.
Type 3 1) Configure the USIF. If this does not fix the appliance then:
2) Replace the USIF with a new one
F-58 E58 - Wrong or invalid
IPC configuration.
Type 2 1) Configure the related IPC If this does not fix the appliance then:
2) Replace the related IPC with a new one