Instruction Manual
Dylastir® Stirrer
Dylatherm® Hotplate
Dyla-Dual® Hotplate-Stirrer
Страница 1: ...Instruction Manual Dylastir Stirrer Dylatherm Hotplate Dyla Dual Hotplate Stirrer ...
Страница 2: ...laced will withstand typical heat produced by the unit and place the unit a minimum of six 6 inches from vertical surfaces Always place the unit on a sturdy work surface The Dyla Series unit is supplied with a 3 prong power cord that should be plugged into a standard 3 prong grounded outlet If the cord supplied does not meet your needs please use an approved power cord that suits local codes and e...
Страница 3: ...lates are not explosion proof Use caution when heating volatile materials Earth Ground Protective Conductor Terminal Alternating Current Ꮨ DYLASTIR DYLATHERM DYLA DUAL SPECIFICATIONS Overall dimensions L x W x H 8 75 x 8 x 4 75 22 2 x 20 3 x 12 1cm Top plate dimensions Dia 6 5 16 5cm Top plate material aluminum Electrical 50 60 Hz Dylastir 120 volts 5 amps 20 watts 230 volts 25 amps 20 watts Dylat...
Страница 4: ... as the thermostat acts to maintain this temperature Rotating the heat control to its full on position will bring the hotplate surface to its maximum temperature of about 400 C After cycling for a short period the plate temperature should stabilize between 350 C and 400 C when the control setting is left on HIGH To prevent possible damage however this position should not be maintained indefinitely...
