Whirlpool ACM230/IX Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 28

Whirlpool ACM230/IX Скачать руководство пользователя страница 6

6

SAFETY PRECAUTIONS AND WARNINGS

-For safety reasons, the hob must only be used after being

installed.

Consult this data before making the connection. In

case of uncertainty, contact an electrician.

-The connection data (voltage and frequency) indicated on

the data plate of the hob must fully correspond with that of

the electrical mains, otherwise the appliance could become

damaged.

-The appliance is not intended for operation with an external

programmer clock or with a remote control system.

-The hob must be connected to the electric mains by an

electrician. If a damaged power cord is replaced, a special

power cord must be installed by an electrician.

-To carry out installation, maintenance or repair work,

disconnect the hob from the power supply.

The appliance is only disconnected from the power supply if:

- the fuse of the electrical system is disabled or

-the fuses of the electrical system have been completely

unscrewed, or

-the plug (if present) has been removed from the socket.

To remove the plug, always hold it; never pull the cord.

-If the hob is equipped with a communication module,

make sure that the module is disconnected from the mains

during installation, maintenance or repair work.

-The filter of a module contains components that remain

charged after the main power supply has been removed.

In the event of residual voltage, the filter components must

discharge the voltage.

«
...
4
5
6
7
8
...
»

Содержание ACM230/IX





























Отзывы:

Нет отзывов