Whirlpool ACM230/IX Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 28

Whirlpool ACM230/IX Скачать руководство пользователя страница 5

5

SAFETY PRECAUTIONS AND WARNINGS

These objects could cause them to climb onto the appliance.

Danger of electric shock!

Do not start or immediately turn off the hob if the

glass ceramic plate is damaged or cracked.

Disconnect the hob from the power supply

Technical safety

-Repairs or incorrectly performed installation and

maintenance work can seriously endanger the user.

-Installation and maintenance work, as well as repairs, may

only be carried out by qualified technician.

-Damage to the hob can compromise the safety of users.

Check that there is no visible damage. Never use a

damaged appliance.

-Electrical safety is only guaranteed if the hob is connected

to a compliant earthing system. Make sure that this

fundamental safety condition is verified. If in doubt, have

the electrical system checked by a qualified technician.

-Do not use the hob in non-stationary locations (e.g. on ships)

-Contact with live parts or changes to electrical or

mechanical structures can endanger the user and cause

malfunctions in the hob.

-Never open the casing of the appliance under any

circumstances. Multiple sockets or extensions is not

allow do not guarantee the necessary level of safety (fire

hazard).

«
...
3
4
5
6
7
...
»

Содержание ACM230/IX





























Отзывы:

Нет отзывов