8
Alternate drain hose connection
methods:
Drain hose to waste tee.
Cut hose
connector to fit.
Screw-type
clamp
Entry must be
above trap.
20" (51 cm)
Minimum
clearance
to floor
Waste tee
(Part No.
675149)
(continued)
3369671-C
If local plumbing codes permit, dishwasher drain hose may
be connected directly to waste tee (Part No. 675149)*. The
waste tee connection MUST be made ahead of the trap and
a minimum of 20 inches above the floor.
Drain hose to disposer.
Do Not
cut hose
connector.
Screw-type
clamp
Remove
disposer
inlet plug
Entry must be
above trap
20" (51 cm)
Minimum
clearance
to floor
If local plumbing codes permit, dishwasher drain hose
may be connected directly to a disposer. Most disposers
have
7
⁄
8
" connectors or special connectors are available
at plumbing supply houses. Be sure to remove the
disposer plug before connecting the drain hose.
*All parts are available through your dealer.
Recommended drain hose
connection methods:
Drain hose to air gap to waste tee.
Air-gap kit
(Part No.
300096)
Cut hose
connector
to fit.
Waste tee
(Part No.
675149)
Screw-
type
clamps
Entry must
be above
trap.
Rubber connector
Part No. 674381
20" (51 cm)
Minimum
clearance
to floor
Drain hose to air gap to disposer.
Air-gap kit
(Part No.
300096)
Remove
disposer
inlet plug.
Entry must be
above trap.
Rubber connector
Part No. 674381
20" (51 cm)
Minimum
clearance
to floor
Screw-type
clamps
Cut hose
connector
to fit.
Install air gap (Part No. 300096)* according to kit instruc-
tions. If other brands of air gaps are used, they should be
checked to make sure they allow for the same water flow.
Connect the air gap to a waste tee (Part No. 675149)* or
disposer using a rubber connector (Part No. 674381)*.
Most disposers have
7
⁄
8
" connectors or special
connectors are available at plumbing supply houses.
Be sure to remove the disposer plug before
connecting the drain hose.
