3-10
The Coil Surface Unit RCM10DB/Q
Removing A Coil Element & Connector
WARNING
Electrical Shock Hazard
Disconnect from electrical supply before ser-
vicing unit.
Failure to do so could result in electrical
shock or other personal injury.
CAUTION
Personal Injury Hazard
When you work on the cooktop, be careful
when handling the sheet metal parts. Sharp
edges may be present and you can cut
yourself if you are not careful.
1.
Turn off the electrical power to the
cooktop.
2.
Make sure that the coil element you are
removing is cool.
3.
To remove a coil element, lift the front of
the coil element, unplug it from the con-
nector, and remove it.
4.
To replace the coil element connector,
remove the coil module from the cooktop.
COIL MODULE
5.
Remove both coil elements, (see step 3),
as well as the reflector bowls from the
module.
6.
Remove the seven hex-head screws from
around the coil module top and lift it off
the base.
7.
Remove the terminal block mounting
bracket screw from the bottom of the base.
8.
Slide the mounting bracket and the insu-
lator away from the terminal block so that
you can access the prong wire screw.
9.
Remove the prong wires from the prong
for the defective coil element connector
and install the wires from the new con-
nector in their place.