3-6
Removing A Terminal Block
WARNING
Electrical Shock Hazard
Disconnect from electrical supply before ser-
vicing unit.
Failure to do so could result in electrical
shock or other personal injury.
CAUTION
Personal Injury Hazard
When you work on the cooktop, be careful
when handling the sheet metal parts. Sharp
edges may be present and you can cut
yourself if you are not careful.
1.
Refer to page 3-4 and remove the cooktop
from the countertop.
2.
To remove the rear terminal block,
re-
move the seven indicated hex-head
screws.
To remove the front terminal block,
remove the two indicated torx screws and
the four hex-head screws from the burner
box, then remove the three hex-head
screws from the front terminal block.
3.
Lift the end of the cooktop just enough to
remove the terminal block you are servic-
ing.
REAR MOUNTING BRACKET
FRONT MOUNTING BRACKET
REAR TERMINAL BLOCK
BURNER BOX
REMOVE THESE
2 TORX SCREWS
TO ACCESS THE FRONT
TERMINAL BLOCK ONLY
REMOVE THESE
4 HEX-HEAD
SCREWS
TO REMOVE EITHER
TERMINAL BLOCK
HEX-HEAD
SCREWS
HEX-HEAD
SCREWS
FRONT
TERMINAL BLOCK
