Whirlpool 30" (76.2 cm) Cooktop, Руководство пользователя

Страница: 9 / 28

9
Complete Installation
Install Vent Covers
Push the lower vent cover down onto the range hood and lift the
upper vent cover to the ceiling and install 4 - 3 x 9 mm screws.
Install Trim Piece
1. Install the 3 trim brackets onto the top of the range hood
using 6 - 3 x 9 mm screws. Do not completely tighten the
screws, to allow adjustments.
2. Remove the protective film from the unpainted side of the
trim piece.
3. Apply protective adhesive tape along one edge of the trim
piece on the unpainted side.
4. Insert the trim piece with the protective adhesive tape side
facing out.
5. Adjust brackets to firmly hold the trim piece and tighten all
screws.
A. Upper vent cover
B. Lower vent cover
C. Vent cover bracket
D. Install 3 x 9 mm screws.
E. Upper vent cover bracket
A. Top of range hood
B. Trim brackets
D
B
C D
A
E
A
B
A. Protective film
A. Protective adhesive tape
B. Correct adhesive tape location
A. Protective adhesive tape side facing out
B. Painted side facing in.
A
A
B
A
B