Installation Manual: Whipple SC 21_F150_R5
Last Updated: June 12
th
, 2021
Page 20 of 39
www.whipplesuperchargers.com
50.
Install the supplied 3/8” fuel cross over line around the back of the supercharger by pressing until they click and lock
in place. 90deg side goes to driver side.
51.
Connect the TMAP extension to stock TMAP 4-way connector.
52.
Plug the (2) fuel injector pigtails to the stock harness.
53.
Install the supplied electronic throttle pigtail to the factory electrical connector. Route under front idler plate front
support for proper safety from belt. Push until it locks in place, then lock the safety lock. Route to LH side of vehicle
for later connection to throttle body. TIP: When pressing together, hold the wires vs connector to ensure the wires
do not come loose during connection.
