WHILL Ci Скачать руководство пользователя страница 22

Страница: 22 / 124

Model Ci User Manual

1. Safety Precautions

Precautions regarding the battery and charger

Carefully read and follow the instructions in this manual regarding the battery and charger.

If used incorrectly, there is a risk of injury or damage to the battery or charger.

Device batetry should not be charged while your body is in contact with the battery or
charger.

There is a risk of low temperature burns.

Never attempt to disassemble the battery or charger.

There is a risk of explosion.

Never touch the device connectors.

There is a risk of serious injury or electric shock. Doing so will also invalidate the device
warranty.

Do not use an extension cord with the charger.

There is a risk of electric shock, short circuit, and fire.

Do not pull the connector cord with excessive force.

There is a risk of electric shock, short circuit, and fire.

Charge the device using a household power supply.

There is a risk of electric shock, short circuit, and fire. Charge using a 100 - 240 V, 50 - 60 Hz
wall-mounted outlet.

Do not charge with wet hands.

There is a risk of electric shock.

Do not allow flame close to the battery or charger, allow these components to become wet,
subject them to impact (dropping, poking with a nail, stepping on, etc.), or engage in similar
acts.

There is a risk of fire or battery explosion.

CAUTION

Содержание Ci





























































































































Результаты поиска

Содержание Ci

Отзывы:

Похожие инструкции для Ci

Бренды по названию

Популярные бренды

WHILL Ci, Руководство пользователя

Результаты поиска

Содержание Ci

Отзывы:

Похожие инструкции для Ci

Бренды по названию

Популярные бренды