WHILL Ci Скачать руководство пользователя страница 39

Страница: 39 / 124

Model Ci User Manual

3. Charging the Battery

Be sure to charge the battery before using a WHILL Model Ci for the first time.

Also charge the battery before using if the device has not been used for a long period of time.

This device is designed for a maximum travel range of 10 miles under ideal conditions; however, the actual

drivable distance varies depending on the driving conditions including hills, curves, steps, terrain, driving habits,

load, and temperature. When if the Device is to be used for a long period of time, it is recommended that attention

be given to the following.

• Fully charge the battery before use.

• Reduce the weight of the storage items as much as possible.

• Plan your route to avoid hills and obstacles.

• Maintain constant speed and avoid sudden stops and frequent stops.

WARNING

Carefully read the explanations in this manual regarding the battery and charger and follow
the instructions.

If used incorrectly, there is a risk of injury or damage to the battery or charger.

Never attempt to disassemble the battery or charger.

There is a risk of explosion.

Never touch the device connectors.

There is a risk of serious injury or electric shock. Doing so will also void the device warranty.

Do not allow flame close to the battery or charger, allow these parts to become wet, subject
them to impact (dropping, poking with a nail, stepping on, etc.).

There is a risk of fire or battery explosion.

Содержание Ci





























































































































Результаты поиска

Содержание Ci

Отзывы:

Похожие инструкции для Ci

Бренды по названию

Популярные бренды

WHILL Ci, Руководство пользователя

Результаты поиска

Содержание Ci

Отзывы:

Похожие инструкции для Ci

Бренды по названию

Популярные бренды