Wheatstone E-SAT, Техническое руководство

Страница: 10 / 126

G E N E R A L I N F O R M A T I O N
page 1 – 3
E-Series Network / Apr 2007
E-SAT - E-Series Satellite Digital Network Router
Stereo I/O may be
split into indepen-
dent mono signals.
Use crossover
wire CAT5 or bet-
ter for all AT and
DSP links.
The E-SAT is a rackmount unit occupying two 19” wide rack spaces
(total height 3 1/2”) with 16” depth.
The E-SAT accepts up to 16 discrete stereo analog or AES-3/SPDIF
digital audio sources, and 16 stereo analog or digital outputs. Integral, high
quality Sample Rate Converters (SRCs) on the digital inputs resolve
sample rates up to 96kHz. The E-SAT may be fitted with up to 4 input
cards, 4 output cards, and 2 logic cards. Hardware is described in the next
chapter.
All audio input, output, and logic connections are made via DB-25
PCB-mounted connectors located on the rear of chassis. The factory
supplied hand crimping tool is used for all DB-25 connections to and from
the router (see instruction on page 1-24). There are also RJ-45 connectors
for audio network and ethernet connections. Cage-to-cage network con-
nections are made by UTP CAT5 crossover cables terminated with RJ-45
connectors.
Assuming the E-SAT is correctly rackmounted, you may now energize
it by connecting the factory supplied power cord to the rackmount unit and
then plugging it into the AC mains.
Front panel LED indicators AC LINE and DC PWR should light up to
indicate the presence of their respective voltages.
The LINK1 and LINK2 LEDs indicate a good connection to the
E-WHEATNET and optional MCS-8 (MCS-8 with Engine) MICROSAT
or IOC.
Note: To de-energize the E-SAT, unplug its AC cord from the AC
mains.
!
!