Wheatstone Corporation G-3, Техническое руководство, Страница: 20 / 66

C O N T R O L P A N E L
page 3 – 2
G-3 / Jun 2004
Control Panel (EFS-G3)
Controls and Functions
The G-3 digital audio control surface is equipped
with one CONTROL panel. This panel contains MONI-
TORS, CUE, TALKBACK, MXM ASSIGN, MXM
TALKBACK, TIMER, METER, and PROGRAM-
MABLE controller sections.
Monitors
There are three monitor outputs available: CON-
TROL ROOM, STUDIO, and HEADPHONE. The
monitor section is located at the bottom of the EFS
panel.
Each monitor has a LEVEL control. Control room
and studio also have a SET button, and a SOURCE
display. There is also a TB button in the studio section.
Monitor sources can be selected several ways:
Four PRE-PROGRAMMED MONITOR MIXES
switches (PGM, AUD, AUX, and UTL) allow direct
access to the main mixes most frequently monitored.
Furthermore, sources can be randomly selected with
the SOURCE SELECT knob and the TAKE button.
To select a source for a monitor, first press the SET
button next to the knob for the desired monitor. The
knob will control the level of the monitor signal.
Control Room Section
In a typical radio application the control surface is
located in the audio control room. Speakers in the
control room allow the control surface operator to
listen to the various control surface bus outputs to be
assured that the control surface is performing as
desired. These speakers are fed by a stereo signal
routed from the control surface’s control room output.
In addition to the control room output, the operator
may also desire to listen to specific isolated faders via the cue
system and the control surface’s internal or external cue speaker,
or may want to listen via headphones.
In some instances the control surface operator may also be
performing talent whose voice will be heard over the radio. The