Wheatstone Corporation G-3, Техническое руководство, Страница: 14 / 66

G E N E R A L I N F O R M A T I O N
page 1 – 7
G-3 / Jun 2004
indexed to the first pin, and the wires are inserted one by one into the jaw
and the trigger squeezed. In this way a single multipin connector can be
completely wired up in a minute or two. These connectors will accept wire
gauge 22 - 26 AWG.
In the event of a wiring error, connector pins may easily be removed
from the shell with the wire still attached, and inserted into the correct
position. Observe the side of the connector, with the metal part down. You
will see a row of "Vees"—simply press the top of the vee together with a
scribe or other sharp instrument; this will unlock the pin from the shell, and
it can be removed and inserted into the correct position. Spread the vee
apart to lock the pin in the new position. It should never be necessary to
discard a connector due to a wiring error.
Note that mating hoods for each connector are also supplied with the
system. These have locking screws that hold the connectors securely to
their mates.
G-3 / May 2005