6
GETTING STARTED
Be sure that you make all the cable connections. Then plug the unit into the mains supply , a red light
will be seen on the front panel. (Standby mode). When the set-top-box is first powered up please wait
for a while before activating the receiver since booting of software will take some time. Then, you can
turn on your digital set-top box by pressing the Standby button on the remote control. You will see that
the red light on the front panel will change to green. (Power on mode)
FRONT AND BACK PANEL
FRONT PANEL
M ENU
REC
OK
PAUSE
ON/OFF
MENU
RECORD
PAUSE
MENU
CHANNEL
UP
MENU/
CHANNEL
DOWN
MENU
LEFT/
VOLUME
DOWN
MENU
RIGHT/
VOLUME
UP
BACK PANEL
RS 232
OPTICAL OUT
AC IN
CVBS
LE FT
RIGHT
TV SCART
HDMI OUT
AUX SCART
35
0
22
3
73
ANTENNA 2
OUT
ANTE NNA 2
IN
ANTE NNA 1
OUT
ANTENNA 1
IN
DO NOT REMOVE
1
2
3
4
5
6
7
8
9
10
11
12
1. AERIAL 2 IN
:
Loop through
2. AERIAL 2 OUT
:
To watch analogue channels on the TV
3. AERIAL 1 OUT
:
Loop through
4. AERIAL 1 IN
:
Aerial input
5. HDMI OUT
:
HDMI video output
6. TV SCART
:
TV Scart connection
7. AUX SCART
:
Output for other equipment such as DVD, VCR...etc.
8. ANALOGUE AUDIO LEFT/RIGHT
:
Analogue Audio output
9. CVBS
:
Video Output
10. OPTICAL AUDIO
:
Optical Digital Audio Output
11. RS232
:
Software Upgrade
12. POWER SUPPLY
:
220-240V AC, 50 Hz
