28
VOLUME CONTROL
The volume level of the sound from the receiver can
be altered with the VOL+ and VOL- keys on the
remote control handset. Pressing either key displays
a bar graph of the sound volume on the TV screen.The volume level selected will remain set, even
when the receiver is turned off and on again, until it is altered with VOL + and VOL - keys.The audio
volume adjustment for the receiver is independent of the volume control on your TV set. Be careful
that both volume controls are kept within reasonable levels so that when switching from analogue to
digital television viewing, or when first turning on your TV set, the sound level is not too high.
You can silence the sound from the receiver by pressing the MUTE key. The sound
remains muted until the MUTE key is pressed again, the VOL + or VOL- keys are
pressed. While the sound is muted in this way, the mute symbol is displayed in the top
left of the TV screen. The symbol is removed after 3 seconds, but the sound will remain
muted until the MUTE key is pressed for the second time and the mute symbol will display for 3
seconds.
PIP (PICTURE-IN-PICTURE)
Enables / disables PIP window.
Picture in Picture stands for a second
channel presented on main screen. You
can watch two channels at the same time
using PIP feature. Press PIP button on
remote control to activate this feature. A
small window will appear on the corner of
the screen where initially the same channel
of main screen is displayed. You can
switch to other channels on PIP window
using PIP+ or PIP- buttons. You may also
swap channels on the main screen and
PIP screen using SWAP button.
Ø
PIP +:
next channel in PIP
window.
Ø
PIP - :
previous channel in PIP window.
NOTE:
PIP is only available when LOOP THROUGH is connected. (Please see page connection
diagrams)
SWAP
Main window and PIP window change their places. In watching mode, this button changes the HDMI
resolution.
TIME SHIFTING (PAUSE LIVE RECORDING)
Timeshift is a special format of record
feature. This feature is used for instant
recording of the live broadcast. You can
watch a scene or an episode of the live
event again using timeshift feature. This
feature is very useful when you miss a
scene due to an interruption or when you
would like to re-watch a scene of the live
event. The live broadcasting can be
stopped any time. Press PAUSE
button to suspend the broadcasting. In the
INFO banner the timeshift will comence.
The duration of Timeshift can be adjusted
from Recordings in the Configuration
menu (See 5.1.RECORDINGS).
