Whalen AVH-1 Скачать руководство пользователя страница 9

Model # AVH-1 

 

Please call for replacement parts or assistance: 

1-866-942-5362

 

Whalen Furniture Mfg., Inc. 

 

  

   Page 9       

 

         Factory No. 16086

 

Assembly Instructions 

 

10. Insert 3 Wood Dowels (3) into the end holes and 4 Cam Locks (1) into the side holes on the 

right of assembled base as shown in detail #4. Make sure the Cam Locks are oriented 
properly.

 

11. Align and attach the Right Side Panel (C) to the Base by engaging all the Cam Locks (1) 

(Refer to page #3 on Cam lock system operation supplement). See detail #4.

 

12. Attach Front Upper Stretcher (E) to the Right Side Panel (C) using a Cam Lock (1). Make 

sure the Cam Lock points towards inside of unit. As shown in detail #4A.

 

13. Repeat the same process to attach the Left Side Panel (B).

 

14. Now, secure the Bottom Panel (D) to the Side Panels (B & C) by inserting and screwing four 

2” Wood Screws (5) into the drilled holes at front side of the Bottom Panel. Securely tighten 
with a Phillips screwdriver. See detail #4.

 

 

 

 

 

 

 
 
 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Содержание AVH-1
















Отзывы: