
Model # AVH-1
Please call for replacement parts or assistance:
1-866-942-5362
Whalen Furniture Mfg., Inc.
Page 11
Factory No. 16086
Assembly Instructions
18. Now, go back and tighten all cam locks and screws. Make sure that all the parts are tight
and there are no gaps between the parts. This will help keep the unit square.
19. Using the pilot holes on the back edge of Top Panel (A) for easy alignment, lay and attach 2
Back Panels (K) in place using the 3/4” Ring Shank Screws (6), as shown in detail #6.
20. Now, attach 2 Cable Controls (11) to the Divider Panel (H) using the 3/4” Bolts (4) provided.
Securely tighten with a Phillips screwdriver. See detail #6.
21. The Cable Controls (11) allow you to organize, route and separate your component cords
and cables to minimize tangling and signal interference. As shown in detail #6.
Hardware required
Sketch
Qty.
(4) 3/4” Bolt
(4)
(6) 3/4” Ring Shank Screw
(24)
(11)
Cable
Control
(2)
Tools required:
Phillips screwdriver,
Rubber Mallet and Hammer