
Model # AVH-1
Please call for replacement parts or assistance:
1-866-942-5362
Whalen Furniture Mfg., Inc.
Page 6
Factory No. 16086
Assembly Instructions
NOTE:
Please do not fully tighten all bolts and screws until you finish assembling all parts.
Once assembled, go back and fully tighten all bolts and screws. This will make the assembly
easy.
1. Unpack the unit and confirm that you have all the hardware and required parts.
2. Place the Top Panel (A), Left & Right Side Panels (B & C), Bottom Panel (D) and Front
Bottom Stretcher (F) on a level and protective surface with the holes facing up. Securely
screw the Cam Bolts (2) into the designated small holes, as shown in detail #1. Make sure
the Cam Bolts are screwed straightly. Fully tighten with Phillips screwdriver.
Hardware required
Sketch
Qty.
(2) Cam Bolt
(22)
Tools required:
Phillips screwdriver