Model # AVH-1
Please call for replacement parts or assistance:
1-866-942-5362
Whalen Furniture Mfg., Inc.
Page 3
Factory No. 16086
Important
Before you begin:
Open, identify and count all parts prior to assembly. Lay out parts on a flat
and non-abrasive surface. You will need the parts identified on page 4 & 5 of this instruction
manual.
NOTE:
IT IS VERY IMPORTANT TO USE GLUE WITH DOWELS. EXCESS GLUE CAN
BE WIPED OFF WITH DAMP CLOTH.
Insert Dowels at least half way by tapping lightly with a rubber mallet, IF NECESSARY.
CAM LOCK SYSTEM OPERATION
HOW THE KNOCK DOWN (KD) ASSEMBLY SYSTEM WORKS
1. Screw the Cam Bolt into the threaded insert on the panel.
2. Insert the Cam Lock into the pre-drilled hole on the panel.
3. Make sure the Cam Lock pointed arrow is pointed towards the entry of the Cam Bolt.
4. Connect both panels together; making sure Cam Bolt goes into pre-drilled hole on the
end of panel with Cam Lock.
5. Once the Cam Bolt is connected inside the Cam Lock, take a Phillips screwdriver and
tighten the Cam Lock clockwise.
You are now ready to assemble the KD unit.