
Model # AVH-1
Please call for replacement parts or assistance:
1-866-942-5362
Whalen Furniture Mfg., Inc.
Page 13
Factory No. 16086
Assembly Instructions
28. In case of uneven floor, Floor Levelers are provided at the bottom of the unit for the necessary
adjustment. To adjust unit in case of tilting or doors not being level, simply tilt the unit back and
raise or lower floor leveler by hand to correct tilting and/or level doors. As shown in detail #8.
TIPPING RESTRAINT HARDWARE
Note: We have included two sets of Tipping Restraint Hardware for this unit. You must
install this hardware to prevent accidents or injuries from falling unit.
When properly installed, this restraint can provide protection against the unexpected tipping
of the unit due to small tremors, bumps or climbing. We strongly recommend mounting this
hardware to a wall stud and your unit.
Please carefully read the instructions printed on the plastic bag containing the tip-over restraints.
You must install the Tipping Restraint Hardware with the unit in use to prevent any
accidents or damage to the unit. Use of Tipping Restraints may only reduce, but not
eliminate, the risk of tip-over.
Tools required: Phillips screwdriver, Mallet, Power Drill, and 3/8” Drill Bit.