3
Warnings
Before installation
read the instructions.
Contact the
Technical Helpline
(0845 0694 253)
if you are unsure.
• The maximum flow rate the pump is designed
to work with is 8 ltrs/min (electric showers) or
12 ltrs/min (mixer shower).
• Do not plumb the pump outlet into waste piping
that other appliances drain into as there is a risk
of induced syphoning. Use an antisyphon trap
where necessary.
• All electrical and mechanical components
(transformer, pump, flow switch and filter)
must be accessible
after installation.
• The shower floor must have a fall of 25 mm
in 1 m.
• Plumbing installation must comply to latest
WRAS regulations.
• The electrical wiring must conform to EU wiring
regulations BS7671:2001 Amdt2:2004.
Note: For optimum performance the transformer settings
will normally require adjustment.
This is a non-gravity installation. It is advisable
where the property is left unattended for an
extended period of time, that the water supply to
the shower is shut off.
If there is a reduction in pump performance after
installation please contact your installer.
Installation
User Warning
Содержание BP1558B
Страница 16: ...16 Transformer 755 199 Pump SDS021T...
Страница 17: ...17 50mm Gulley 755 140 Pump Cover...