WG Pro-Guard, Инструкция по эксплуатации

Страница: 13 / 32

Pro-Guard & Uni-Guard Installation Manual
9
Optional Split System Connection for Pro-Guard (two Tx’s & one Rx)
There is another split system configuration for Pro-Guard, two transmitters and one receiver.
Two interconnections are required to connect two 6-pole connectors from J3 and J12 (see
page 14) on the bottom PC board of the receiver to each transmitter. This provides a
convenient way for one Pro-Guard receiver to slave two transmitters.
Please note that a
second transformer box is required. One transformer box can only power one standard
Pro-Guard system (Tx and Rx).
Tx Tx Rx
3-Pin Power Connector
3-Pin Power Connector
6-Pin Interconnector 6-Pin Interconnector
3-Pin Power Connector
24V Transformer
24V
24V
110/220vac
Note: This configuration requires
two transformer boxes because
one transformer box can supply
power to only one Pro-Guard
system (Tx/Rx).