Wezag WDT UP 14 ZLW, Руководство по эксплуатации

Страница: 33 / 51

BDA UP 14 ZLW
– 4481N16000 – 09/16 – REV. C
Page 33 / 51
+
Only one person is allowed to work on or with the machine at a time.
+
Only trained personal are allowed to work on or with the machine.
+
It is only allowed to work with the specified air pressure.
+
When working with the pneumatic Crimp Machine UP 14 ZLW, do not wear loose clothing,
jewellery or long, loose hair that can get caught in the pneumatic Crimp Machine UP 14
ZLW.
+
Disconnect the pneumatic Crimp Machine UP 14 ZLW from the air supply before
attempting any maintenance work. Due to the risk of hand or finger injury, never try to
reach into the machine before having assured that the machine is disconnected from the
air supply.
+
The machine can only be depressurized by disconnecting the machine from the main air
supply.
+
For maintenance work wear adequate protective gloves and safety glasses. Pleas pay
attention to the safety instructions in th
e “safety data sheet” of the grease.
2.3 Responsibilities
The pneumatic Crimp Machine UP 14 ZLW may only be operated by suitably trained and
authorized personnel. The user must clearly define and observe the responsibilities of the
personnel for operation, set-up, maintenance and service. It is particularly important to define
who is responsible for work on the pneumatic equipment. Such work should only be carried
out by specially trained staff.
Should the user make any changes to the machine without consulting the producer or
distributor, the latter will not be liable for any damage that may result.
The user of the pneumatic Crimp Machine UP 14 ZLW is responsible for making sure that all
persons involved in any way, either in the installation or in maintenance of the machine, have
been thoroughly trained on the system using this operating instruction.
The user is also responsible for the training of operators and the instruction must include the
following aspects:
+
Purpose of the machine
+
Hazard zones
+
Safety rules and regulations
+
Functionality of the various components of the machine
+
Proper operation of the machine
To assure full familiarization with the system, the training must be conducted in the native
language of the operators involved.
Staff qualifications required in conjunction with the use of the pneumatic Crimp
Machine UP 14 ZLW:
Installation
Set-up
Instruction Technical personnel with language proficiency in either English or
German, in addition to the native language of the operator.
Operation
Through qualified personnel trained as indicated above.
Maintenance
Service Technical personnel with proficiency in English or German.
The safety instructions, warnings and precautions contained in the individual chapters must be
strictly observed by all users and operators.