WD-59CTS & WD-66CTS
Rev. (202210)
Operating instructions
43
4.2.7
Emergency stop
The machine has three emergency stop buttons. One of the emergency stop
buttons (1) is located beneath the touch panel. The other emergency stops (1) are
located at the infeed and outfeed.
If an emergency stop button is pressed during operation, the reason for the
emergency stop must be rectified. The emergency stop is then reset by turning
the emergency stop button in the direction indicated by the arrows on the
emergency stop button. You must reset the alarm on the touch panel before you
can restart the belt.
4.2.8
Guaranteed final rinse
The temperature of the final rinse water is always correct and the right amount of
rinse water is always used.
If there is an error during the final rinse, this is indicated by an alarm and
information on what must be done.
4.2.9
Changing the water
Use the menu button on the touch panel to access the menu. Select the program
for changing the water and follow the instructions on the touch panel.
To achieve the best possible washing results, it is important that the water is
changed frequently. However, always change the water in the event of foam
problems in the tank.
Recommendations
•
Change the water if a large amount of foam forms.
•
If a large number of items need washing before lunch and relatively few
during the afternoon, change the water directly after the lunchtime wash.
•
If a large number of items need to be washed after breakfast and after
lunch, change the water twice, both after breakfast and after lunch.