wakeboard tower speakers to the next level, Wet Sounds has consulted with experts who
spent countless hours examining the human auditory system to find out which frequencies
affect your ears the most at loud volumes. The Revolution series has been designed from the
ground up to provide stunning output while eliminating certain frequencies that give that
“ringing” or harsh sound associated with loud volumes. This allows the Revolution speakers
to provide maximum output while still providing world class sound quality without the
listener fatigue usually associated with high volumes.
The driver compliment in each REV 8 combines one 8 inch Kevlar reinforced EFG™ driver
and one concentrically mounted HLCD (Horn Loaded Compression Driver). The driver
compliment in each REV 10 also combines one 10 inch Kevlar reinforced EFG™ driver and
one concentrically mounted HLCD (Horn Loaded Compression Driver) which provide stellar
performance and higher performance for the marine environment, Wet Sounds™ developed a
proprietary cone material called EFG™, which is an epoxy and fiberglass composite mix.
Adding a reinforcement of Kevlar, the mid bass cones become more rigid without any added
weight. This cone material incorporates characteristic values that are impermeable to
damage from intermittent Ultra Violet exposure and minimal moisture exposure. Like the
EFG™ cone material, the Polyurethane that is used for the surround will provide protection
against Ultra Violet exposure and moisture. This will prevent deterioration of the surround
yielding longer life and better reliability. We do, however, encourage you to either remove or
cover your tower speakers when they are not in use. Limiting exposure to Ultra Violet Rays
and to moisture will help extend the life of your tower speakers.
The high frequency transducer is our proprietary titanium Wet Sounds HLCD (horn loaded
compression driver). This driver was designed to provide a wide; horizontal trajectory that
would not only produce sound in the directed path but will disperse sound off axis with little
to no degradation. The HLCD is considered to be one of the most efficient transducer designs
providing remarkable output while using less power. Our unique (patent protected) design
incorporates the HLCD mounted to the rear of the mid bass driver. Our Pro-Axial™ design
allows the compression sound to travel through the voice coil former and out of the (patent
protected) horn flare that is mounted coaxially. This provides phenomenal volume and
accurate clarity.
***Caution: Do not spray any of the speakers directly with any liquid base substance.
Warranty will be voided if improper care is discovered during extensive examination of the
product.
