background image

Owner’s Manual & “Limited” Warranty

 

 

Technology Specifications: 

 
Thank You for purchasing this Wet Sounds  product.  Wet Sounds marine audio products 
represent the ultimate in high performance standards.  The Revolution Series is specifically 
engineered to withstand the rigorous marine environment.  Utilizing the state of the art 
acoustic engineering and three dimensional computer aided design, our “Revolution 
Technology” represents the most advanced technologies available for wakeboard tower 
speaker systems. The Revolution series also provides multiple fitment options from direct 
cast mount to fixed clamp mount to our revolutionary (Patent Pending) stainless steel TC3 
Quick Disconnect Swivel clamp.  
 
Please take a moment to read the instruction manual before starting your installation. This 
manual will explain the benefits of the technologies developed by Wet Sounds and will help 
you understand the correct installation methods and use of this product. If you have any 
questions or concerns please contact a certified Wet Sounds dealer. You may also contact 
Wet Sounds technical support by dialing 1-877-WET-SPKR (1-877-938-7757) 
 
SPEAKER SPECIFICATIONS REV 8 
RMS: 200 watts 
Peak: 400 watts 
Mid Bass: 8 inch Kevlar reinforced EFG™ cone woofers with polyurethane surround 
High Frequency: Pro-Axial™ Driver - Coaxially mounted Titanium Diaphragm High Output 
Horn Loaded Compression Driver 
Impedance: 4 ohm 
Frequency Response: 20Hz to 20 kHz 
Sensitivity: 92DB at 1W/1M  
 
SPEAKER SPECIFICATIONS REV 10 
RMS: 300 watts 
Peak: 600 watts 
Mid Bass: 10 inch Kevlar reinforced EFG™ cone woofers with polyurethane surround 
High Frequency: Pro-Axial™ Driver - Coaxially mounted Titanium Diaphragm High Output 
Horn Loaded Compression Driver 
Impedance: 4 ohm 
Frequency Response: 20Hz to 20 kHz 
Sensitivity: 92DB at 1W/1M  
 
 
The Revolution™ series uses our proprietary REV TEC™ technology.  Unlike most 
conventional designs, REV TEC technology provides remarkable volume and amazing full 
range sound quality on axis and off axis at long distances. Extensive acoustic testing has 
confirmed these speakers ability to project volume at 80 feet and beyond without any loss of 
detail or information.  Not only does the Revolution series achieve volume and sound quality 
at a minimum of 80 ft, but with the REV TEC technology the rider can enjoy quality sound 
while riding outside the wake and being almost parallel to boat.  Taking high performance 

Содержание REV 10














Отзывы: