To use
The receiver unit and the base unit require
batteries.
Receiver unit
Open the battery compartment on the reverse
of the receiver by exerting a little pressure and
pushing in the direction of the arrow. Insert
two appropriate batteries as specified in the
case and close.
Base unit
The base unit has a battery compartment
with a snap lock on the underside. Insert two
appropriate batteries as specified in the case
and close.
Battery type: AAA 1.5 V
To switch on: There are ‘Power’ switches on
the underside of the base unit as well as on
the reverse of the receiver unit. Switch both of
these onto ‚ON‘. The control light on the base
will briefly light up.
Then insert the measuring wire with the plug
into the plug-in point of the base unit. The
thermometer is now ready for use and will dis-
play the current temperature ‚CURRENT TEMP‘.
(Note: if the wire is not plugged in correctly,
you will hear a tone signal, the control lamp
will flash and an error indication will appear in
the display.)
The thermometer features a wireless sensor.
Keep the base unit on a table or work surface
(not too near a heat source!!) whilst carrying
the receiver unit with you. The transmitter
works up to a maximum distance of 30 m.
MODE
MEAT
TASTE