background image

44

LPG CONVERSION 

LPG CONVERSION 

MODELS WFE914SB & WFEP915SB

This appliance is supplied set up for Natural Gas 

usage. A conversion kit is included with the product 

for Universal LPG usage. The conversion kit contains 6 

injectors and 1 LPG sticker.
Please follow the procedure below if a conversion to suit 

UNIVERSAL LPG is required:
1.   Remove the hotplate trivets, burner caps and burner 

crowns to access the hotplate injectors. Replace the 

factory fitted injectors with the appropriate injectors, 

as supplied. Refer to injector orifice table for injector 

sizes. The injector size is stamped on the side of the 

injector.

2.   Unscrew the top hat nut from the regulator. The top 

hat nut and control pressure spring assembly will 

disengage as an assembly.

3.   Unscrew the threaded pin from top hat.
4.   Upturn threaded pin, so spring is free and screw pin 

back into the top hat until firm.

5.   Refit the top hat nut assembly to the regulator 

ensuring that it is fully screwed down. The regulator 

is now set for connection to LPG.

6.   Turn on the gas supply and at each new connection 

check for leaks using soapy water. Each hotplate 

valve should be turned on, one at a time, and the 

injector hole blanked off for several seconds.

7.   The operation of the regulator can be confirmed by 

connecting a manometer to the pressure test point 

located on the side of the regulator body adjacent 

to the outlet.

With the appliance operating check the outlet pressure:
 

•  when all burners of the appliance are operating  

at maximum,

 

•  when the smallest burner of the appliance is 

operating at minimum.

 

 Under these conditions the outlet pressure should 

not vary from the nominal outlet pressure of 

2.60kPa by more than ±0.52kPa.

8.   If the regulator appears to not be performing 

satisfactorily then check the following points:

 

•  If the outlet pressure is consistently too low then 

the inlet pressure may be too low and adjustment 

of an upstream regulator may be needed, or an 

upstream regulator or valve with insufficient flow 

capacity may be present in the gas supply line. 

If this is suspected then it may be necessary to 

repeat the checks whilst measuring both the 

inlet and outlet pressure to determine if the inlet 

pressure is in the range 2.75 – 7.00kPa.

 

• Check that the insert has been fitted correctly.

 

• Check that the turret screw is fully screwed down.

 

•  Check that the regulator has been fitted to the gas 

supply line in the correct orientation, the arrow on 

the base of the body indicates the direction of gas 

flow.

Once these checks have been completed, if the regulator 
still fails to perform in a satisfactory manner it should be 
replaced.

9.   One by one, turn the knobs to minimum and screw 

in the bypass screw (accessible when the knob is 
removed) until a small stable flame results. Turn 
the knob to maximum and then back to minimum 
to ensure that the correct minimum flame is 
maintained.

10.   Attach the LPG sticker to the cooker, near the gas 

supply inlet. Cover the Natural Gas label that is 
factory fitted.

Flame size adjusted 

to maximum

Flame size adjusted 

to minimum

Bypass screw

Control knob shaft

Reposition

Top hat nut assembly, fully 

screwed down

Turn top hat 

nut anti-

clockwise 

and remove

Configuration for 

Natural Gas

Configuration for LPG

A

B

C

D

E

F

G

H

Содержание WFE914SB

















































Отзывы: