Westinghouse WFE914SB, Руководство пользователя

Страница: 15 / 48

15
USING YOUR CERAMIC COOKTOP
Switching the ceramic cooktop on and off
CONTROL PANEL DISPLAY
Switch on Touch for 2 seconds
/
Switch off Touch for 2 seconds
/ none
TIPS & INFORMATION
TIPS AND INFORMATION
After switching on, within approx. 10 seconds a heat setting
or a function must be set, otherwise the appliance
automatically switches itself off.
Setting the heat setting
CONTROL PANEL DISPLAY
To increase
Touch to
To decrease Touch
to
To switch off
Touch until
TIPS & INFORMATION
TIPS AND INFORMATION
The keep warm setting lies between and . It is used
to keep food warm.
Switching the outside ring on and off
By switching the outside rings on or off, the effective
heating surface can be matched to the size of the
cookware.
TIPS & INFORMATION
TIPS AND INFORMATION
Before an outside ring can be switched on, the inside ring
must be switched on.
TRIPLE
COOKING ZONE
CONTROL
PANEL
INDICATOR LIGHT
To switch on the
middle ring
Touch for
1-2 seconds
Two indicator lights
are lit
To switch on the
outside ring
Touch for
1-2 seconds
Three indicator
lights are lit
To switch off the
outside ring
Touch for
1-2 seconds
The third indicator
light goes out
To switch off the
middle ring
Touch for
1-2 seconds
The second indicator
light goes out
MULTI-PURPOSE
ZONE
SENSOR
FIELD
INDICATOR
LIGHT
To switch on the
outside ring
Touch for
1-2 seconds
is lit
To switch off the
outside ring
Touch for
1-2 seconds
goes out
USING YOUR CERAMIC COOKTOP
Locking/unlocking the control panel
The control panel, with the exception of the ‘On/Off’
sensor field, can be locked at any time in order to prevent
the settings being changed eg. By wiping over the panel
with a cloth.
CONTROL
PANEL
DISPLAY
Switch on
Touch
(for 5 seconds)
Switch off
Touch
the previously set
heat settings
TIPS & INFORMATION
TIPS AND INFORMATION
When you switch the appliance off, the locking function is
automatically switched off.
Using the automatic warm-up function
All cooking zones are equipped with an automatic warm
up function. When setting a heat setting using , when
starting from , the cooking zone switches to full power
for a certain amount of time and then automatically
switches back to the heat setting set.
CONTROL
PANEL
POSSIBLE
HEAT
SETTINGS
DISPLAY
Switch on
(only when
starting at )
Touch to
(after
5
seconds)
Switch off Touch
to / to
Not used Touch
to to
TIPS & INFORMATION
TIPS AND INFORMATION
If during the automatic warm up a higher heat setting
is selected, e.g. from to , the automatic warm up is
adjusted.
If there is still residual heat on the cooking zone
(display ), the automatic warm up is not performed.