Westinghouse PT50360, Инструкция по эксплуатации

Страница: 2 / 11

1 9 2 9
This electric tool is double insulated and is manufactured according to. It has an
appealing design and can be transported easily because of its small
measurements. It provides safe and reliable operation and requires a voltage of
120V and a frequency of 60Hz. The power input is 600W , the no load revolutions
per minute (rpm) is 12000. Metal as well as non-metal materials can be handled
with it.
1 Technical Data
2 Installation, safety instructions, operation, maintenance and repair
Attention!
To protect oneself against electric shock, risk of injury and fire, basic safety
measures have to be observed when using electric tools!
Before operating this electric tool, read all operating and safety instructions.
Please keep the safety instructions for future reference.
Installation
1. After taking the electric tool out of the packaging, first of all please check if the
tool has been damaged while in transit. Ensure that the voltage and frequency
rating of the power outlet you use matches the requirements of this tool - if not,
there is danger of Life and the possibility of damaging the tool. The flex has to be
an AWG 18x2c. Damaged flexes have to be replaced by a flex of the same type.
2. Check the wheel guard of the grinding disc. It has to be securely mounted, the
apex angle must not be more than 1800 and it must be neither deformed nor
damaged.
3. Grinding disc
3.1 Do only use pulp reinforced blades with a safety Limit concerning the grinding
speed of not less than 80m/s. They must not be used beyond their expiration
date. Do not use wet blades. Unplug the tool before replacing the blade.
VISTA EN DESPIECE
Rated voltage:
Frequency:
Power input:
No load revolutions per minute:
Spindel:
Insulation class of engine:
Grinding disc (outside diameter x inside
diameter x thickness):
Types
Weight:
External dimensions (in mm):
PT50360
115x22x6mm
120V
60Hz
600W
12000 rpm
5/8”
Class II
1.9kg
300x128x115