uk
WESTFIRE · WF
33
· WF
34
WESTFIRE · WF
33
· WF
34
uk
12
13
Permanent air vent
The stove requires a permanent and adequate air supply in order for it to operate safely and efficiently.In accordance
with current Building Regulations the installer may have fitted a permanent air supply vent into the
room in which the stove is installed to provide combustion air. This air vent should not under any circumstances
be shut off or sealed.
War ning nOte
Properly installed, operated and maintained this stove will not emit fumes into the dwelling. Occasional fumes
from de ashing and re fuelling may occur. However, persistent fume emission is potentially dangerous and must
not be tolerated. If fume emission does persist, then the following immediate action should be taken:
(a) Open doors and windows to ventilate room
(b) Let the fire out or eject and safely dispose of fuel from the appliance
(c) Check for flue or chimney blockage and clean if required
(d) Do not attempt to relight the fire until the cause of the fume emission has been identified and corrected.
If necessary seek expert advice.
The most common cause of fume emission is flueway or chimney blockage. For your own safety these must be
kept clean at all times.
iMPOr tant nOtes
general
Before lighting the stove check with the installer that the installation work and commissioning checks described
in the installation instructions have been carried out correctly and that the chimney has been swept clean, is
sound and free from any obstructions. As part of the stoves’ commissioning and handover the installer should
have shown you how to operate the stove correctly.
use of fireguard
When using the stove in situations where children, aged and/or infirm persons are present a fireguard must be
used to prevent accidental contact with the stove. The fireguard should be manufactured in accordance with BS EN
8423: 2002.
chimney cleaning
The chimney should be swept at least once a year for smokeless fuels and a minimum of twice a year for wood
and other fuels. It is important that the flue connection and chimney are swept prior to lighting up after a pro-
longed shutdown period.
If the stove is fitted in place of an open fire then the chimney should be swept one month after installation to
clear any soot falls which may have occurred due to the difference in combustion between the stove and the
open fire.
In situations where it is not possible to sweep through the stove the installer will have provided alternative
means, such as a soot door. After sweeping the chimney the stove flue outlet and the flue pipe connecting the
stove to the chimney must be cleaned with a flue brush.
Hetas Ltd approval
This appliance has obtained HETAS Ltd approval on a safe and fit for purpose level (single tick approval) for burn-
ing wood logs only as detailed in list of recommended fuels. Approval does not cover the use of other fuels either
alone or mixed, nor does it cover instructions for the use of other fuels.
guar ant ee
Your new stove is covered by a five year guarantee against manufacturing defects. Your receipt documents the
date of purchase. The guarantee does not cover damage caused by faulty operation such as overheating or the
stove being incorrectly connected, or damage which occurs as a result of external physical force.
The guarantee does not cover damage to replaceable parts, transport costs associated with repairs under warranty
or the installation/dismantling of the stove in connection with repairs under warranty.
Warning! Any unauthorised modification of the appliance is forbidden.
Only replacement parts recommended by Westfire ApS should be used for repairs
Ver MicuLite Fir e Br ick instaLLatiOn seQuence – West Fir e uniQ 33, 34
Place rear brick (03)
at back of chamber
with sloping edge
to the top. Sloping
face to rear of stove
Fit upper baffle (02)
on top of side brick.
Rest brick on metal
support
Place lower baffle
(02) above rear
brick, chamfered
edges to the rear of
stove. Hold baffle in
place and push in
two securing pins
into side bricks. Rest
baffle on pins.
Place front and rear
base bricks (05) in
place.
Fit log retaining
bars (12)
Place one side
brick (04) in place.
Sloping section to
rear of stove.
While holding upper
baffle brick in place,
fit second side brick
(04) ensuring upper
baffle is securely in
place.
Place two base
bricks (07) and
grate support (10)
on base of stove
Place cast grate
(WFUN00PA01)
in place. Slide log
retainer (08) facing
to front of stove.
