11
Using
To ensure proper functionality and a long lifetime, diligent maintenance
is essential.
For operating pneumatic devices, clean air is required. Corrosion
residues, dust and dirt from the pneumatic pipes reduce the efficiency
of the device and will cause technical problems. An upstream mainte-
nance unit consisting of filter and pressure regulator valve removes
moisture and dirt from the air and controls the working pressure.
After use, clean the air sand blaster and the nozzle insert with a moist
cloth.
Do not use abrasive or aggressive chemicals as benzene or thinner,
which may dissolve plastic parts.
Do not allow liquids to enter the unit and never immerse it into liquids.
Water in the compressed air inlet can damage the machine. Therefore it
is recommended to drain the air lines and the compressor in regular
intervals! Also clean the air filters in regular intervals.
The air sand blaster requires clean and oil-free air. So do not use an oil-
fog lubricator within the air supply system.
If possible, only use compressed air hoses for the air supply that
previously have not been used with other air tools which required an
oil-fog lubrication system.
Lubricate the moving parts of the trigger from time to time.
Only use grinding material that is absolutely dry and that is not too
coarse.
Storing
Store the air sand blaster and the accessory in a dry location that is
protected from dust and dirt.
