Westfalia 92 21 48, Оригинальное руководство пользователя, Страница: 65 / 90

23
Maintenance
Maintenance Hints

Only use original replacement parts and original accessory. The
use of unapproved accessories and cutting tools increases the risk
of accidents.

Incorrect repair and poor maintenance can shorten the life of the
machine and increase the risk of accidents. Do not perform any
modifications to the machine as this will endanger your safety.

The condition of the cutting tool, the protective hood and the
shoulder harness must be checked before starting work. Particular
attention is to be paid to the cutting tool, which must be correctly
sharpened.

Turn off the engine and remove the spark plug cap when replacing
or sharpening the cutting tool, and also when cleaning the cutting
tool.

Never straighten or weld damaged cutting tools.

Clean the machine at regular intervals and check all screws and
nuts are well tightened.

Never service or store the machine in the vicinity of open flames.

When cleaning, servicing and storing the machine, always attach
the cutter blade protection.
Maintenance after each Operation
ATTENTION! Before cleaning, inspecting or maintaining the motor unit,
make sure that engine is stopped and has cooled down. The engine will
heat up during operation. Do not touch the exhaust system. There is
risk of burns!
Before working on the machine (transport, mounting, dismounting,
cleaning and servicing) and if not in use, remove the spark plug cap or
disconnect the gear shaft from the motor unit!
Frequent Inspections

Before starting work and after refuelling the tank, check if the
cutting tool is seated securely.

Even when used in the intended way, some components are
subject to normal wear. They have to be checked frequently. These
parts include, among others, the brush cutter blade, the protective