9
Preparation and Use
Mounting the Biker Handle
1. Mount the Biker handle as shown. Loosen the hex screws of the
biker handle holder with the included hex key and insert both
handle parts into the Biker handle holder. (4).
2. Adjust both handle parts of the biker handle according to your body
size, so the machine can be hold firmly and securely. Re-tighten the
hex screws.
The machine is designed that way to be carried on the right side of
the operator.
Hint: For space-saving transport and storing, dismount the left
handle part and turn the right control handle in direction to the
motor housing.
3. Fasten the throttle cable (9) with the
included clamps on the tube. By
doing this, the cable cannot be
damaged if accidently jammed.
4. Insert both tube into each other and
lock them with the locking screw.
Содержание 92 21 48
