Preparation
5
Before first Use
Unpack all parts of the device and check them for damage in transit
and completeness according to the overview on page
III + IV
.
Dispose of packaging materials or store it out of reach of children.
Plastic bags etc. may become a deadly toy for children.
Intended Use
The sliding gate opener is only designed for operating light-
weighted sliding gates in the domestic, non-commercial sector with
medium transit frequency. The max. permissible size of the gate
and the max. weight must not be exceeded (see Technical Data).
Mounting Conditions/Requirements
The sliding gate opener is designed for gates with max. weight of
600 kg. The structure of the gate has to be rigid (iron, metal,
wood). The gate path must not have any gradients/slopes.
The sliding gate system must be in good mechanical and
trouble-free condition and should not be damaged or has signs
of wear. It must be possible to open and close the gate by hand
without any problems. The mechanical gate lock must be dis-
mounted resp. disengaged.
The gate slide track must be linear and horizontal. The gate
poles have to be fixed in concrete.
The magnet limit switches are correctly positioned.
The control box may only be installed by a qualified professional
in an easily accessible place.
The centre of gravity of the gate must be in the middle of the
gate (max. allowable deviation ± 20 %).
Preparation
1. Check all parts for damage in transit. Do not use a defective
sliding gate opener or defective accessory.