Western UltraMount, Руководство пользователя

Страница: 32 / 102

Lit. No. 49513, Rev. 04 33 June 15, 2022
OPERATING YOUR SNOWPLOW
Control Functions
RAISE, LOWER, FLOAT, Angle
Moving the control lever straight up and down or
from side to side on the control body will result in
the blade movements described in the following
tables.
Function Description of Operation
RAISE
Move the control lever toward the top of
the control body to raise the snowplow
and cancel the FLOAT mode.
LOWER
Move the control lever toward the bottom
of the control body to lower the snowplow.
Release the lever to stop blade at desired
height.
FLOAT
†
Move the control lever to the LOWER
position and hold ¾ second to activate
this mode. The FLOAT light in the upper
right corner of the control face will
illuminate. The blade will lower to the
ground surface and follow the contour
of the surface as it dips or rises. This
function does not time out, but the control
will shut down after 20 minutes of nonuse.
Move the lever to the
RAISE position
momentarily to cancel FLOAT. Angling left
or right will not interrupt (stop) the FLOAT
function.
†
FLOAT mode activates immediately when the one‑touch
FLOAT feature is enabled. See "One‑Touch FLOAT" in this
section for more information.
L R
RAISE
LOWER
ON/OFF FLOAT
1 2
3 4
FLOAT Light
(green)