Western UltraMount, Руководство пользователя

Страница: 36 / 102

Lit. No. 49513, Rev. 04 37 June 15, 2022
OPERATING YOUR SNOWPLOW
Function Description of Operation
L
(Angle
Left)
With wings in a straight line, press the
L
button to move both wings to the angle
left position to cast snow to the driver's
left side. The left wing retracts while the
right wing extends (MVP PLUS™).
R
(Angle
Right)
With wings in a straight line, press the R
button to move both wings to the angle
right position to cast snow to the driver's
right side. The right wing retracts while
the left wing extends (MVP PLUS).
NOTE: If a control function times out before
the desired blade movement is complete,
release the button and press it again.
Scoop/Retract Blade Position
The two round buttons located to the left and right
of the RAISE button move both wings at the same
time into the blade positions described in the
following table.
Function Description of Operation
SCOOP
Press this button to extend both wings
forward into the scoop position.
RETRACT
Press this button to draw both wings into
the fully retracted (vee) position.
Wing Positions
The two round buttons located to the left and right of
the LOWER button move either wing independently
of the other as described in the following table.
RAISE
ON/OFF FLOAT
1 2
S C O
O
P
R
E
T
R A C T