Western UltraMount, Руководство пользователя

Страница: 27 / 102

Lit. No. 49513, Rev. 04 28 June 15, 2022
OPERATING YOUR SNOWPLOW
STRAIGHT BLADE CabCommand
HAND-HELD CONTROL
1. Turn the vehicle ignition switch to the "ON" or
"ACCESSORY" position. The control backlight
will illuminate.
2. Press the ON/OFF button on the control. The
power indicator light glows red, indicating that
the control is ON. The power indicator light
glows red whenever the control and vehicle
ignition switch are both ON and the electrical
connections to the snowplow are completed.
The ON/OFF button operates as an
emergency stop, if required.
Function Time-Outs
To limit the amount of electrical energy required
from the vehicle, all control functions, except
LOWER/FLOAT, time out (stop) automatically after
a period of time. The blade will coast to a stop.
The time‑outs are written into the programming
and vary by snowplow model.
NOTE: If a control function times out before
the desired blade movement is complete,
release the button and press it again.
WARNING
To prevent accidental movement of the
blade, always push the ON/OFF button
to switch the control OFF whenever
the snowplow is not in use. The power
indicator light will turn OFF.
RAISE
LOWER
R L
ON/OFF
FLOAT
1
4 3
2
Power Indicator
Light (red)
FLOAT Light
(green)
ON/OFF Button
(emergency stop)