Western UltraMount MVP V-Plow Series Скачать руководство пользователя | Manualshive

Страница: 31 / 92

background image

Lit. No. 28270, Rev. 00

July 1, 2005

31

Button

Description of Operation

RAISE

Press this button to raise the snowplow and to cancel the float mode.

NOTE:

Snowplow will automatically stop raising after 2.5 seconds. To

resume raising the snowplow, release the button and press again.

LOWER

Press this button to lower the snowplow.

NOTE:

After reaching the desired height, release the button. Holding the

button down for more than 3/4 second will activate the float mode
(indicated by green FLT LIGHT), which allows the blade to move up and
down to follow the contour of the surface being plowed.

L/SCP

Press this button to extend both wings to the scoop position.

R/VEE

Press this button to retract both wings to the vee position.

Vee/Scoop Mode

To put the control into the vee/scoop
mode, quickly press and release the
MODE button. The yellow MODE
LIGHT near the upper left corner of
the keypad will light. Quickly pressing
and releasing the MODE button will
toggle the control between straight
blade mode and vee/scoop mode.

The following functions are
performed in the vee/scoop mode:

NOTE: Blade wings may not move
at the same speed.

Mode

Light

ON

Mode

Button

Wing Mode

To put the control into the wing
mode, press and hold the MODE
button for about two seconds until
the yellow MODE LIGHT near the
upper left corner of the keypad is
flashing. The L/SCP and R/VEE
buttons are used to activate the four
functions of the wing mode. The
RAISE and LOWER buttons retain
the same functions as the other
modes.

To deactivate the wing mode, quickly
press and release the MODE button.
This will put the control in the straight
blade mode.

The following functions are
performed in the wing mode:

Button

Description of Operation

RAISE

Press this button to raise the snowplow and to cancel the float mode.

NOTE:

Snowplow will automatically stop raising after 2.5 seconds. To

resume raising the snowplow, release the button and press again.

LOWER

Press this button to lower the snowplow.

NOTE:

After reaching the desired height, release the button. Holding the

button down for more than 3/4 second will activate the float mode
(indicated by green FLT LIGHT), which allows the blade to move up and
down to follow the contour of the surface being plowed.

L/SCP

Pressing this button the first time will retract the left wing. Pressing this
button the next time will extend the left wing.

R/VEE

Pressing this button the first time will retract the right wing. Pressing this
button the next time will extend the right wing.

Mode Light
FLASHING

Mode

Button

SYSTEM OVERVIEW – CONTROLS

«
...
29
30
31
32
33
...
»

Содержание UltraMount MVP V-Plow Series





























































































Отзывы:

Нет отзывов

Похожие инструкции для UltraMount MVP V-Plow Series

GSS Professional

Бренд: CANADIANAe new brand!!! Страницы: 296

Бренд: Pakole Страницы: 28

Бренд: Tanaka Страницы: 86

Бренд: Ariens Страницы: 8

Бренд: PowerBase Страницы: 30

Бренд: Stark Страницы: 23

Бренд: Zanussi Страницы: 2

Бренд: Homestead Страницы: 15

LANDSHARK LSC Series

Бренд: Asphalt Kingdom Страницы: 11

Бренд: Dolmar Страницы: 96

Бренд: F.F. Group Страницы: 24

Бренд: Dustcontrol Страницы: 68

Бренд: Haybuster Страницы: 12

MB2205 41AB225Q077

Бренд: McCulloch Страницы: 2

Бренд: YATO Страницы: 96

Бренд: Yazoo/Kees Страницы: 32

Бренд: ebm-papst Страницы: 11

Бренд: Agri-Fab Страницы: 28

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды