Western UltraMount 2, Руководство пользователя

Страница: 85 / 120

Lit. No. 72444, Rev. 05 86 April 1, 2021
OPERATING YOUR SNOWPLOW
Clearing Driveways
1. Head into the driveway with the blade angled
and plow the snow away from any buildings.
Widen the driveway by rolling snow away from
any buildings.
2. If a building is at the end of the driveway, plow
to within a vehicle length of the building. Push
as much snow as possible o
ff the driveway.
3. With a raised blade, drive through remaining
snow to the building. Drop the blade and back
drag snow away from the building at least one
vehicle length. Repeat if necessary.
4. Back the vehicle to the building and plow
forward, removing the remaining snow from
the driveway. Check municipal ordinances for
proper disposal of snow.
Clearing Parking Lots
1. Clear areas in front of buildings fi rst. With the
blade raised, drive up to the building. Drop
the blade and back drag the snow away from
the building. When the snow is clear of the
buildings, turn the vehicle around and push
the snow away from the buildings toward the
outer edges of the lot. Back drag edges are
available as an accessory for select snowplow
models.
2. Plow a single path down the center in the
lengthwise direction.
3. With the blade in the scoop, angle, or dogleg
position, plow successive strips lengthwise
until the area is cleared and snow is stacked
around the outer edges.
4. If the snow is too deep to clear in the above
manner, clear the main tra ffi c lanes as much
as possible.