Western UltraMount 2, Руководство пользователя

Страница: 43 / 120

Lit. No. 72444, Rev. 05 44 April 1, 2021
OPERATING YOUR SNOWPLOW
Automatic Shutdown
The control will automatically turn OFF after being
idle for 20 minutes. To reactivate the control after
a shutdown, press the ON/OFF button.
Optional Control Features
The control ships from the factory with the Smooth
Stop feature enabled and the One-Touch FLOAT
feature disabled. To change these default settings,
see "Smooth Stop" and "One-Touch FLOAT" later
in this section of the Owner's Manual.
Control Functions
RAISE, LOWER, FLOAT, Angle
The four diamond-shaped buttons in the center of
the control face, when pressed, will result in the
blade movements described in the table.
Function Description of Operation
RAISE
Press this button to raise the blade and
cancel the FLOAT mode.
LOWER
Press this button to lower the blade.
Release the button to stop the blade at
desired height.
FLOAT
†
Press the LOWER button and hold
0.75 second to activate FLOAT mode.
The FLOAT light in the upper left corner
of the control face will illuminate. The
blade will lower to the ground surface
and follow the contour of the surface as it
dips or rises. Function does not time out;
however, the control will shut down after
20 minutes of nonuse.
Press the
RAISE button momentarily to
cancel FLOAT. Angling left or right will
interrupt (pause) the FLOAT function,
but the FLOAT light will stay illuminated
and FLOAT will resume when angling is
complete.
† FLOAT mode activates immediately when the one-touch
FLOAT feature is enabled. See "One-Touch FLOAT" in this
section for more information.