Western UltraMount 2 Скачать руководство пользователя страница 103

Страница: 103 / 120

Lit. No. 72444, Rev. 05

104

April 1, 2021

HYDRAULIC SYSTEM MAINTENANCE

Fluid Level

NOTE: On MVP PLUS™, MVP 3™,
ENFORCER™, WIDE-OUT™, and
WIDE-OUT™ XL blades, add

uid only when

all rams are retracted.

NOTE: Remove the

ll plug slowly to relieve

any pressure in the reservoir.

1. With the UltraMount

2 system attached to the

vehicle, activate the control.

MAINTENANCE

2. For PRODIGY™ and straight blades any

angle will do, but for MVP PLUS, MVP 3,
ENFORCER, WIDE-OUT, and WIDE-OUT XL
blades, move the blade wings to the fully
retracted (vee) position.

3. Activate the control FLOAT function and

manually collapse the lift ram all the way.

4. Turn the control OFF.

CAUTION

Do not mix di

ﬀ

erent kinds of hydraulic

uid. Some

uids are not compatible and

may cause performance problems and
product damage.

Drain

Plug

Breather/
Fill Plug

Fill
Plug

Drain

Plug

HTS™

Straight Blades

Содержание UltraMount 2

























































































































Результаты поиска

Содержание UltraMount 2

Отзывы:

Western UltraMount 2, Руководство пользователя, Страница: 103 / 120

Результаты поиска

Содержание UltraMount 2

Отзывы: