Western UltraMount 2, Руководство пользователя

Страница: 56 / 120

Lit. No. 72444, Rev. 05 57 April 1, 2021
OPERATING YOUR SNOWPLOW
Function Description of Operation
L
(Angle
Left)
With wings in a straight line, move the
control lever straight to the left to move both
wings to the angle left position. The left
wing retracts while the right wing extends
(MVP PLUS™, MVP 3™, ENFORCER™).
R
(Angle
Right)
With wings in a straight line, move the
control lever straight to the right to move
both wings to the angle right position.
The right wing retracts while the left wing
extends (MVP PLUS, MVP 3, ENFORCER).
SCOOP/RETRACT Blade and WING Positions
Moving the control lever from the center position
toward the word SCOOP or RETRACT on the face
of the control body will cause both wings to move
at the same time into the following blade positions.
Moving the control lever from the center position
toward the word WING on either side of the face
of the control body will cause either wing to move
independently of the other, as described in the
following table.
Function Description of Operation
SCOOP
Move the control lever toward the word
SCOOP on the control face to extend both
wings forward into the scoop position.
RETRACT
Move the control lever toward the word
RETRACT on the control face to draw
both wings into the fully retracted/vee
position.
NOTE: If a control function times out before
the desired blade movement is complete,
release the lever to the center position, then
move it back into the desired function.
SECURITY GUARD™ System (1, 2, 3, 4)
Moving the control lever from the center position
toward any of the four digits on the face of the
control will also operate the SECURITY GUARD
system. See "SECURITY GUARD System" in this
section for more information.